The time clock has a built in relay where a bell can be connected and configured to ring at different times during the day. The connection is very simple and following the instructions and guidelines below the bell should work, however we recommend to get assistance from an electrician since this type of connection requires a little bit of electrical knowledge.
The device has a built in relay that will output 12v, so you will be need to use a bell/buzzer that requires 12v to operate. After the connection is done you will have to configure on the device menu options up to 10 times during the day where the device will ring and each time can be configured to ring for up to 10 seconds.
Connection Diagram and pictures
Color definition from the bell connector
BLACK = Common contact
WHITE= Normally Closed
GREEN= Normally Opened
Click on the link below for a full data sheet of the built in relay inside the Easy Clocking device.
How to configure the times for the time clock to ring during the day
Depending on which time clock you have purchased, it may come with the below items.