Getting Started Guide

Upload User database

Once you have downloaded the user database from one terminal you can upload it on other terminals.

To upload the user database you first need to plug the USB drive into the terminal.

 

The port is located in the bottom of the terminal.

 

Once this is done you can enter the terminals menu.

 

 

  1. Press the 'MENU' button to enter the 'Main Menu' of the terminal

 

Once in the 'Main Menu' you need to go to the 'USB Disk' option.

 

  1. Use the arrow keys to navigate to the 'USB Disk' option.
  2. Once 'USB Disk' is highlighted press the 'OK' button to enter the menu.

 

Once in the 'USB Disk' menu you need to choose 'Upload User Database'

 

 

  1. Use the up and down arrow to navigate to the 'Upload User Database' option.
  2. Once this option is highlighted press the 'OK' button to begin the process. (The USB Disk must already be plugged in when you press OK)

 

Once the screen states that its done then you can remove the USB Disk.

 

  1. Once the process is complete you will see the message on the screen. You can then take out the USB Disk.
  2. Press the 'OK' button to clear the message.

 

And then the users data will be on this terminal and if you had fingerprints / cards / pins enrolled at the other terminal they can now also clock in on this terminal.