Getting Started Guide

Configure WiFi Settings



Xenio and TimeLogix series






  1. Tap on the Menu icon located in the upper left-hand side of the main screen 
  2. Tap on the Wi-Fi option 
  3. Enable the Wi-Fi option on the Time Clock
    To enable, toggle the Wi-Fi switch located at the top of the Wi-Fi screen,from OFF to ON.

  4. Select your wireless network from the list
  • If your network is secured (authentication required) you will need to enter the associated security key to connect.
  • If your network is open (no authentication required,) the device will connect automatically and you will be returned to the network list.

Our Xenio devices are configured to connect via DHCP by default. If you prefer to connect via a Static IP, select your wireless network,
enter the associated password and change the IP Settings from DHCP to Static. You will then be prompted for the IP Address, Gateway
and Network Prefix Length, also known as the Subnet Mask.
When you have finished entering your network credentials, click Connect in the lower right-hand side of the screen.
You will be taken back to the network list screen. Your wireless network will attempt to connect at this time. Once a connection is established, your wireless network should read “Connected” instead of “Secured” below the network name. An established network will also display a Wi-Fi icon in the upper right-hand side of the screen.