Getting Started Guide

Connect via Ethernet/LAN/Network Cable

The Xenio time clock comes with a Network Interface Card (NIC), It has a RJ45 port built into the back that allows a CAT 5/5e/6 cable to connect the time clock to the network. 

Configure the time clock:

  1. Tap on the Menu icon located in the upper left-hand side of the main screen 
  2. Tap on the Ethernet option 
  3. Verify that your network is pulling a valid IP address
    Our Xenio devices are configured to connect via DHCP by default. If you prefer to connect via a Static IP, change the IP Settings from DCHP to Static IP.
    You will then be prompted for the IP Address, Gateway and Network/Subnet Mask.

  4. Once you have verified a valid IP address, click Save.