EC - Connecting to a network via Ethernet
To configure Ethernet settings on the time clock do the following:
- On the time clock Press Menu, and use the right arrow to select Settings and press OK.
- Select SetIP and press OK.
- Scroll down to IP Address and ensure an address shows.
(0.0.0.0 Indicates an IP address has not been received, check your DHCP settings from the router.)
(192.168.1.128 Indicates we have turned DHCP off from the clock and the device is using the default address assigned) - Once the device has received an IP address Please confirm the Host PC settings is setup correctly:
Easy Clocking Support Team Contact Details
Related Articles
EC - Connecting to a network via Ethernet
You can connect or "hard wire" your Xenio to an Ethernet Cable if you'd prefer a more consistent connection. To connect your device to a network via Ethernet, plug an Ethernet cable directly into the bottom of the time clock. Once the cable is ...Xenio - Connecting to a network via Ethernet
You can connect or "hard wire" your Xenio to an Ethernet Cable if you'd prefer a more consistent connection. To connect your device to a network via Ethernet, plug an Ethernet cable directly into the bottom of the time clock. Once the cable is ...EC - Connecting to a Wi-Fi network
Connecting your Xenio to a Wi-Fi network is as easy as connecting your cellphone... And if the connection ever drops, the time clock will retain the data until it reconnects to your Wi-Fi, and then transfer everything into the software! Please ...EC - Connecting to a Wi-Fi network
To configure Wi-Fi settings on the time clock do the following: On the time clock Press Menu, and use the right arrow to select Settings and press OK. Select SetIP and press OK. Scroll down to Wi-Fi and press OK. Press OK on Use Wi-Fi and using the ...Xenio - Connecting to a Wi-Fi network
Connecting your Xenio to a Wi-Fi network is as easy as connecting your mobile phone... And if the connection ever drops, the time clock will retain the data until it reconnects to your Wi-Fi, and then transfer everything into the software! Please ...