EC - Connecting to a Wi-Fi network
Connecting your Xenio to a Wi-Fi network is as easy as connecting your cellphone... And if the connection ever drops, the time clock will retain the data until it reconnects to your Wi-Fi, and then transfer everything into the software!
Please note: WiFi card in the clock is 2.4 GHz ONLY. 5 GHz networks do not populate in the network list.
To connect your time clock to a Wi-Fi network, navigate to:
- Menu
2. Wi-Fi
3. Confirm that the switch at the top of the screen is set to ON.
A list of available Wi-Fi networks will load. Select your Wi-Fi network.
4. You will be prompted to enter your Password. Click Connect when finished.
If you would like to switch from DHCP to Static, scroll to the bottom of the screen and click on the drop-down for the option.
Easy Clocking Support Team Contact Details
Related Articles
EC - Connecting to a Wi-Fi network
To configure Wi-Fi settings on the time clock do the following: On the time clock Press Menu, and use the right arrow to select Settings and press OK. Select SetIP and press OK. Scroll down to Wi-Fi and press OK. Press OK on Use Wi-Fi and using the ...Xenio - Connecting to a Wi-Fi network
Connecting your Xenio to a Wi-Fi network is as easy as connecting your mobile phone... And if the connection ever drops, the time clock will retain the data until it reconnects to your Wi-Fi, and then transfer everything into the software! Please ...EC - Connecting to a network via Ethernet
You can connect or "hard wire" your Xenio to an Ethernet Cable if you'd prefer a more consistent connection. To connect your device to a network via Ethernet, plug an Ethernet cable directly into the bottom of the time clock. Once the cable is ...EC - How to check your device is online
If you check your TimeCard and cannot see the clock in and out times. Then it may be because your clock device is not connecting to our cloud system. Note: If you have recently upgraded or changed your modem, please note the device (time clock) only ...EC - Connecting to a network via Ethernet
To configure Ethernet settings on the time clock do the following: On the time clock Press Menu, and use the right arrow to select Settings and press OK. Select SetIP and press OK. Scroll down to IP Address and ensure an address shows. (0.0.0.0 ...