EC - Connecting to a Wi-Fi network
To configure Wi-Fi settings on the time clock do the following:
- On the time clock Press Menu, and use the right arrow to select Settings and press OK.
- Select SetIP and press OK.
- Scroll down to Wi-Fi and press OK.
- Press OK on Use Wi-Fi and using the right arrow change it to YES.
- Scroll down to Search Wi-Fi hub and press OK.
- Then press MENU to display all available Wi-Fi network.
- Use the arrow keys to select the desired Wi-Fi network and press OK.
- Press OK once again until T9 is displayed and use "text on 9 keys" to enter the Wi-Fi password.
- Using the keypads numbers and letters enter the networks password (1= No letter, 2=ABC, 3=DEF, 4=GHI, 5=JKL, 6=MNO 7=PQRS 8=TUV 9=WXYZ. To add a capital letter first press 0 (Zero) then press the letter, For special characters, press ^ (up arrow) and browse through the different characters and select the number that matches the symbol.
- Press OK once finished and then scroll down to OK to confirm and save.
- Once the Wi-Fi selection has been made, click under "Link Information" to verify connection status and signal strength.
Please note: WiFi card in the clock is 2.4 GHz ONLY. 5 GHz networks do not populate in the network list.
Easy Clocking Support Team Contact Details
Related Articles
EC - Connecting to a Wi-Fi network
Connecting your Xenio to a Wi-Fi network is as easy as connecting your cellphone... And if the connection ever drops, the time clock will retain the data until it reconnects to your Wi-Fi, and then transfer everything into the software! Please ...Xenio - Connecting to a Wi-Fi network
Connecting your Xenio to a Wi-Fi network is as easy as connecting your mobile phone... And if the connection ever drops, the time clock will retain the data until it reconnects to your Wi-Fi, and then transfer everything into the software! Please ...EC - Connecting to a network via Ethernet
You can connect or "hard wire" your Xenio to an Ethernet Cable if you'd prefer a more consistent connection. To connect your device to a network via Ethernet, plug an Ethernet cable directly into the bottom of the time clock. Once the cable is ...EC - How to check your device is online
If you check your TimeCard and cannot see the clock in and out times. Then it may be because your clock device is not connecting to our cloud system. Note: If you have recently upgraded or changed your modem, please note the device (time clock) only ...EC - Connecting to a network via Ethernet
To configure Ethernet settings on the time clock do the following: On the time clock Press Menu, and use the right arrow to select Settings and press OK. Select SetIP and press OK. Scroll down to IP Address and ensure an address shows. (0.0.0.0 ...