Xenio - Connecting to a network via Ethernet
You can connect or "hard wire" your Xenio to an Ethernet Cable if you'd prefer a more consistent connection.
To connect your device to a network via Ethernet, plug an Ethernet cable directly into the bottom of the time clock. Once the cable is connected, we will need to confirm that an IP address is being pulled.
Our time clocks pull a dynamic IP address by default, however, you can change this to be a Static IP at any time.
To confirm the network IP address on your time clock, navigate to:
1. Menu
2. Ethernet
The IP Settings will read DHCP by default. If you would like to switch to Static, click on the drop-down for the option.
Otherwise, the following information will auto-populate:
- IP Address
- Gateway
- Network Mask
Easy Clocking Support Team Contact Details
Related Articles
EC - Connecting to a network via Ethernet
You can connect or "hard wire" your Xenio to an Ethernet Cable if you'd prefer a more consistent connection. To connect your device to a network via Ethernet, plug an Ethernet cable directly into the bottom of the time clock. Once the cable is ...Xenio - Device Installation
Note: Installation instructions are for a Xenio 50, 200 & 500 device. If you have a Xenio F500/F1000, please refer to this article. If you have a Xenio i1000, please refer to this article. We suggest that a qualified tradesperson install and mount ...EC - Connecting to a network via Ethernet
To configure Ethernet settings on the time clock do the following: On the time clock Press Menu, and use the right arrow to select Settings and press OK. Select SetIP and press OK. Scroll down to IP Address and ensure an address shows. (0.0.0.0 ...Xenio - Connecting to a Wi-Fi network
Connecting your Xenio to a Wi-Fi network is as easy as connecting your mobile phone... And if the connection ever drops, the time clock will retain the data until it reconnects to your Wi-Fi, and then transfer everything into the software! Please ...EC - Connecting to a Wi-Fi network
Connecting your Xenio to a Wi-Fi network is as easy as connecting your cellphone... And if the connection ever drops, the time clock will retain the data until it reconnects to your Wi-Fi, and then transfer everything into the software! Please ...