Xenio - Connecting to a Wi-Fi network

Xenio - Connecting to a Wi-Fi network

Connecting your Xenio to a Wi-Fi network is as easy as connecting your mobile phone... And if the connection ever drops, the time clock will retain the data until it reconnects to your Wi-Fi, and then transfer everything into the software!


Please note: WiFi card in the clock is 2.4 GHz ONLY. 5 GHz networks do not populate in the network list.

To connect your time clock to a Wi-Fi network, navigate to:

  1. Menu

2. Wi-Fi



3. Confirm that the switch at the top of the screen is set to ON. 
A list of available Wi-Fi networks will load. Select your Wi-Fi network. 




4. You will be prompted to enter your Password. Click Connect when finished.



If you would like to switch from DHCP to Static, scroll to the bottom of the screen and click on the drop-down for the option.


    Easy Clocking Support Team Contact Details



    Contact our Support Team on 1300 693 610

      • Related Articles

      • EC - Connecting to a Wi-Fi network

        Connecting your Xenio to a Wi-Fi network is as easy as connecting your cellphone... And if the connection ever drops, the time clock will retain the data until it reconnects to your Wi-Fi, and then transfer everything into the software! Please ...
      • Xenio - Device Installation

        Note: Installation instructions are for a Xenio 50, 200 & 500 device. If you have a Xenio F500/F1000, please refer to this article. If you have a Xenio i1000, please refer to this article. We suggest that a qualified tradesperson install and mount ...
      • EC - Connecting to a Wi-Fi network

        To configure Wi-Fi settings on the time clock do the following: On the time clock Press Menu, and use the right arrow to select Settings and press OK.  Select SetIP and press OK. Scroll down to Wi-Fi and press OK. Press OK on Use Wi-Fi and using the ...
      • Xenio - Connecting to a network via Ethernet

        You can connect or "hard wire" your Xenio to an Ethernet Cable if you'd prefer a more consistent connection. To connect your device to a network via Ethernet, plug an Ethernet cable directly into the bottom of the time clock. Once the cable is ...
      • EC - Connecting to a network via Ethernet

        You can connect or "hard wire" your Xenio to an Ethernet Cable if you'd prefer a more consistent connection. To connect your device to a network via Ethernet, plug an Ethernet cable directly into the bottom of the time clock. Once the cable is ...