Xenio - Enrolling Iris on i1000
1. Tap on the Menu icon located in the upper left-hand side of the main screen
2. Select the Users option
3.Tap on the User’s name from the list. You may also search for a specific user by tapping on the search box at the top of the list. Once a user is selected, options will become available to the
right-hand side of the screen.
4. To enroll a User’s Iris, tap the Iris icon on the right-hand side of the screen. This is the first icon from left to right.
5. On the next screen, you will be prompted to scan your Iris once. The Iris sensor will show as Disconnected momentarily before loading the front-facing camera for enrollment.
6. The front-facing camera will then appear. Position yourself in front of the device and use the prompts to properly guide yourself through the enrollment.
Note: During the enrollment process, the front-facing camera sensitivity will be at its highest. We strongly recommend that you remain as still as possible during this process and attempt minimal movement.
7. The last screen will confirm the Iris has been enrolled successfully.
Easy Clocking Support Team Contact Details
Related Articles
Xenio - Device Installation
Note: Installation instructions are for a Xenio 50, 200 & 500 device. If you have a Xenio F500/F1000, please refer to this article. If you have a Xenio i1000, please refer to this article. We suggest that a qualified tradesperson install and mount ...Xenio - Enrolling Proximity Card
Note: This option is not available on Xenio i1000 devices and Xenio 500 devices that do not have RFID option. In order to enrol a user on the time clock, you will first need to create them in the software. The user then requires Clocking ...Xenio - Enrolling Fingerprints
Note: This option is not available on Xenio50 and i1000 devices In order to enrol a user on the time clock, you will first need to create them in the software. The user then requires Clocking Permissions so they can be sent to the device ...Xenio - Enrolling Pin
In order to enrol a user on the device, you will first need to create them in the software. The user then requires Clocking Permissions so they can be sent to the device for enrolment. Check out our Clocking Permissions article for further ...Xenio Device Manuals
Links for User Manuals of the Xenio devices that you have purchased: Xenio 50 User Manual Xenio 200 User Manual Xenio 500 User Manual Xenio 700 User Manual Xenio i1000 User Manual Xenio F500 Manual & Xenio F1000 Manual